4500PSI 30Mpa PCP Air Compressor - High Pressure Pump for PCP Air Rifles & Paintball Guns | Oil-Free Water-Free Design | 110V AC/12V DC Power | Manual Stop Safety Feature | Portable Airgun Compressor Kit with Transformer | Perfect for Hunting, Target Shooting & Outdoor Sports

ApplicationIt can quickly fill air bottles (up to 1.06 qt capacity). It fits most PCP airguns, air rifles, and paintball HPA tanks (<1.06 qt, e.g. 48/3000, 26/3000, etc.).First Use Steps1.Check the AC voltage at the bottom (default 110V).2.Connect the power supply and air hose.3.Turn on the cooling fan.4.Tighten the release valve to the right.5.Set air pressure.6.Start the compressor.7.After inflation, loosen the release valve.8.Disconnect and save.SpecificationColor: OrangeProcess: SprayingMaterial: Aluminum, Stainless SteelMount Type: FreestandingAssembly Required: Yes Power Source: Battery PoweredNoise: 75dBPower: 250W Motor Horsepower: 0.75HPCapacity: Less Than 1L/1.06QtPower Supply: 110V AC/12V Car Battery (40+A)Maximum Air Pressure: 300Bar/4500PSICooling Fan Speed: 12500rpmFilling Speed: 0.5L/0.53Qt, Takes about 18 Minutes Connector Size: 8mm/0.315inAir Compressor Size: 20*17*13.5cm/7.87*6.69*5.31inPackage Size: 30*26*26cm/11.81*10.24*10.24 inNet Weight: 5.2kg/11.46 lbs Gross Weight: 7.2kg/15.87 lbs Package Included1* Air Compressor1* Transformer 1* Air Hose 1Pair* Battery Power Cables 1* English ManualAll Accessories for UseNotes 1.Please read the instruction manual completely before installation and use, and pay particular attention to the safety instructions included.2.You need to check the air pressure value yourself.3.Please confirm whether there are loose fasteners in various parts before use. Please confirm whether the fan operates normally after the machine is started and whether there are any abnormalities in the sound of the machine, such as friction sound, uneven operation sound, and air leakage sound. 4.You need to manually stop the inflation when the air pressure reaches the set point, when it has been inflated for 25 minutes, or when the temperature reaches 185℉. A beep will sound when inflation is complete. 5.After a full load, please keep the cooling fan running for a few minutes and then manually turn it off. The compressor switch and cooling fan switch need to be pressed briefly, not continuously.6.The process of automotive use is similar to using home, red corresponds to "+" and black corresponds to "-". It is necessary to keep the car started while the compressor is working.7.Please allow the slight color difference caused by the shooting light and 1-3cm error due to manual measurement and make sure you do not mind before ordering.

【Sturdy & Durable】Built with high-strength aluminum and stainless steel, this PCP air pump is wear-resistant, shockproof, and perfect for outdoor use.

【Efficient Pumping】Powered by a 250W motor, it fills 0.53qt of air in just 18 minutes (0-4500PSI) or 6 minutes (2900-4500PSI), saving you time.

【Safe & Reliable】A high-speed cooling fan (12,500 RPM) and multiple cooling holes ensure stable performance. The pressure gauge and temperature display let you monitor the process and avoid over-inflation.

【User-Friendly Design】Features an intuitive interface with a cooling fan switch, compressor switch, pressure relief screw, and power sockets. The AC voltage selector (110V default) and clear displays make operation easy.

【High Adaptability】Includes a transformer and battery cables, supporting both household 110V AC and 12V car battery power for use in various environments.