The gear pump is the power element in the hydraulic system.Material: The pump body is made of special high-strength cast aluminum, and the pump adopts high-precision gears, which can minimize deformation even under high pressure.Features: Simple structure, light weight, high efficiency, low noise, reliable operation.Application: Widely used in hydraulic systems such as automobiles, engineering machinery, lifting and transportation machinery, mining machinery, light industrial machinery, and agricultural machinery.Precautions1. Working mediumPetroleum-based mineral oil with a viscosity range of 10-300mm2/s can be used. It is recommended to use 46# anti-wear hydraulic oil. Do not mix different types of hydraulic oil.2. Working temperatureThe working temperature range is -20~100C°. In order to prolong the service life of the pump, it is recommended to use the working temperature in the range of 20~80C°.3. Driver installationThe drive shaft cannot bear any radial and axial pressure.4. CleanlinessIt is required that the cleanliness of the system oil should not exceed Class 9 (NAS 1638). 5. Pipe connectionChoose proper oil pipes and joints, avoid using hard connections, and carefully clean oil pipes and joints before assembly.6. ExhaustBefore the first use, fill the pump with oil, and remove the air in the pump and pipeline under the condition of low pressure and no load. If there is air in the pipeline in the pump, it will cause noise and vibration of the pump and affect the service life of the pump.7. MaintenanceThe installation, maintenance and repair of the pump are handled by professionally trained personnel. The pump is only allowed to work within the set range. Always check whether the bolts are locked according to the standard torque and maintain them in time.
