Design House 791681 Coventry Handleset with Ball Interior Knob & Single Cylinder Deadbolt - Oil Rubbed Bronze Finish | Secure Entry Door Hardware for Home & Office

Product Description The Design House 791681 Coventry 2-Way Latch Handle Set accepts a key on one side of the lock but is operated by a turn-button handle on the other side. Finished in oil rubbed bronze and designed for left or right hand doors, this knob and keyway fit the two most common backsets in the U.S. (2-3/4-inch and 2-3/8-inch). The 1/2-inch latch bolt is plated in nickel and does not budge once in place. Entry knobs are often used on front doors and back doors. Use this knob on standard 1-3/8-inch and 1-3/4-inch thick doors. This product has a 1-inch by 2-1/4-inch radius corner face plate and 5-pin security. If you are preparing your door for installation, the cross bore should be 2-1/8-inches in diameter and the edge bore should be 1-inch in diameter. Designed and manufactured by Design House, the trusted source for quality lighting, hardware, plumbing, kitchen, and bath products for every taste and budget. From the Manufacturer The transitional oval design of the Coventry handleset is the perfect statement piece for your entrance door.

Finished in oil rubbed bronze and designed for left or right hand doors

ANSI Grade-3 Certified for residential security

Fits 2-3/4-inch and 2-3/8-inch backsets; Fits 1-3/8-inch and 1-3/4-inch thick doors

Handle Set includes single cylinder deadbolt, exterior handle and interior passage knob/lever.

5-Year limited mechanical/5-Year limited finish warranty