Free shipping on all orders over $50
7-15 days international
30 people viewing this product right now!
30-day free returns
Secure checkout
78312531
Product Features: -Suitable for all vehicles, boats and off-road vehicles, etc.. -The gauge has the advantages of high precision, quick location confirmation and short start up time. - No Subscription is required, the GPS service is totally free. -IP67 waterproof and dustproof grade -Indicating Range: digital GPS Speedometer, digital Tachometer, Hour Meter, TRIP/ODO, Trip Meter, Water Temp, Fuel Level, Oil Pressure, Voltmeter -Stepper motors used for full range of stepping gauges, great feature with its less power consumption, longer life, higher precision, etc. -With curved glass (with anti-fogging function) Which gauges need to be used with sensors? -Tachometer, match tacho sensor. -Water temp meter, match temp sensor. ohm signal refers to manual page 2. -Oil pressure meter, match pressure sensor. ohm signal refers to manual page 2. -Fuel level meter, match level sensor. ohm signal also refers to manual page 2. -Voltmeter, don't need match sensor. How to install it ? - Cut an 85mm (3 3/8") hole in the panel and allow a clearance of 70mm (2 3/4”) behind the panel to fit the gauge. - Put the gauge in the hole. - Using M4 nut and C type bracket to seal up the gauge. - For the GPS antenna, you should securely fasten it in the flat position, black side upwards, preferably outside (or inside front windscreen) so that it has a clear view of the sky to pick up satellite signal. Connect the antenna cable to socket in the back of the gauge. And do not cut cable. GPS Speedometer keeps counting? - After installation in the first time, GPS speedometer needs to search for signal, that's the reason that LCD counts numbers all the time. - After getting signal, LCD will come back to 0. It is normal. Why don't get RPM signal? - Tachometer sometimes cannot get signal by ignition system. So, I suggest Tacho sensor signal. It is more stable. - I suggest you can buy a Tacho sensor from Eling Parts. ASIN NO. is B07RR8NQ45, B07RN3HJ72. Technical Data Fixing dimension 85mm(3-3/8") Speed Range 0~999 km/h,MPH,Knots Working Voltage 12V/24V Trip Range 0~999.9 km/h,MPH,Knots ODO Mileage Range 0~999999 km,miles,knots (not adjustable) RPM Range 0-9999 RPM Temp Range 40-120℃/104-248℉ Fuel level Range 0-100% Oil Pressure Range 0-5Bar/ 0-10Bar (0-75Psi/0-150Psi) Hours Range 0~99999.9 hours COG (Course Over Ground) 0-359 Operation mode LCD display, stepper motor Protection grade IP67 How to be setting Tach RPM Ratio? 1. Turn on the power supply first. 2. Press and hold the mode button for 3 seconds to enter the setting speed ratio mode. then adjust speed ratio from 1-300 according to your request. 3. After setting, Data is automatically saved. 4. Please note: If your sensor is installed on the flying wheel panel, the RPM ratio is equal to the number of gears of the engine; If the speed signal takes from W-Terminal, the RPM ratio is equal to the half of the number of poles. 5. Normally, When the engine at idle state, tachometer shows 600-800rpm that means speed ratio is correct. If not, you can turn down or turn up speed ratio to check RPM difference. Multi-functional Gauge Multi-functional Gauge Multi-functional Gauge Multi-functional Gauge Multi-functional Gauge Multi-functional Gauge Add to Cart Add to Cart Add to Cart Add to Cart Add to Cart Add to Cart Customer Reviews 3.7 out of 5 stars 134 3.7 out of 5 stars 134 3.7 out of 5 stars 134 — 3.6 out of 5 stars 3 — Price $81.99$81.99 $81.99$81.99 $81.99$81.99 $61.99$61.99 $82.99$82.99 $66.99$66.99 size 85mm 85mm 85mm 85mm 85mm 85mm color white+stainless steel black+stainless steel black+black white+stainless steel black+stainless steel black+stainless steel adjustable odometer no no no no yes no Package Includes: 1x Multi-functional Gauge 1x GPS Speed Sensor 1x Multi-plug socket 1x Installation Instruction
Installation Diameter 85mm (3 3/8”)
Cut an 85mm (3 3/8") hole in the panel and allow a clearance of 70mm (2 3/4”) behind the panel to fit the gauge. Put the gauge in the hole. Using M4 nut and C type bracket to seal up the gauge.
For the GPS antenna, you should securely fasten it in the flat position, black side upwards, preferably outside (or inside front windscreen) so that it has a clear view of the sky to pick up satellite signal. Connect the antenna cable to socket in the back of the gauge. And do not cut cable.
Speed range 0~999 km/h, MPH, Knots. RPM Range 0-9999 RPM. Temp Range 40-120℃(104-248℉), unit adjustable. Oil Pressure Range0-5Bar/ 0-10Bar(0-75Psi/0-150Psi), unit adjustable. Fuel level Range 0-100%. Voltmeter 8-32V.
Protection Class IP67, can work underwater 1meter position
Everything worked as it should but with red and blue numbering it can not be seen on sunny day on our boat.