8 Row AN6 Transmission Oil Cooler with Electric Fan - 38mm Core, 180°F In-Hose Thermostat Kit for High-Performance Vehicles & Racing Applications - Perfect for Towing, Off-Roading, and Extreme Driving Conditions

Fluid Cooler:Universal 8 row tube and fin all-aluminum heavy duty transmission cooler kit.Extend transmission life by helping prevent heat-related transmission failures.Perfect for highly-stress full-size car, truck and RV automatic transmissions.High efficiency turbulation and ultrasonically soldered for the best reliability.Dimensions: 0.75" x 10" x 15.87" with 3/8" hose barb inlets, GVW 26000 lbs.Electric Fan:Universal 12 volt high performance 9" inch slim electric cooling fan.Upgraded 90 watt motor draws 8 amps, producing over 702 CFM.Configured as an air puller by default or reversible to an air pusher.Includes mounting bracket feet and complete cooler fin tie strap kit.Measures 9.75" x 9.75" x 2.4" thickness at center and 1.1" at edge.Wiring Kit:Universal automotive electric fan 5-pin 40A relay switch harness kit.14AWG size wire powers 1-2 cooling fans or 12 volt auto accessories.Maximum 30 amp continuous draw with 30A in-line fuse protection.A/C override or manual toggle switch wire built directly into harness.Installation instructions, wiring diagram and components included.Fitting:38mm OD radiator hose electric fan thermostat temperature sensor.Anodized aluminum in-line fitting adapter in various diameter sizes.Preset to ground fan at 180'F turn-on and 165'F turn-off temperature.Single pin 1/8" inch NPT brass thread-in probe grounding switch.Measures temp of any liquid including oil, water and coolant fluid.

8 pass tube and fin all-aluminum heavy duty transmission cooler kit.

Dimensions 0.75" x 10" x 15.87" with 3/8" hose inlets, GVW 26000 lbs.

Upgraded 90 watt fan motor draws 8 amps, producing over 702 CFM.

Configured as an air puller by default or reversible to an air pusher.

Preset to ground fan at 180'F turn-on and 165'F turn-off temperature.