Norton IM200 Knife Sharpener Oil Stone Sharpening Stone Kit with Coarse /Medium Crystolon and Fine India Stones, Sharpening Stone Oil and Knife Angle GuideThe NORTON IM9 India fine-grit replacement oilstone for the IM313 sharpening system is made of 320-grit aluminum oxide, suitable for sharpening and maintaining steel cutting edges; it produces durable, smooth-cutting edges and is preferred for close tolerances. The stone is prefilled with oil to save time and eliminate the need to presoak it prior to use. The oil prevents metal from bonding with the abrasive surface by flushing away dislodged abrasive and metal chips. This oilstone is commonly used to replace a stone in the Norton IM313 sharpening system, or as a bench stone, to restore cutting edges on straight-edged tools such as chisels, knives, plane blades, and precision instruments.The 8 In. x 2 In.. x 1 In. IM200 tri-stone system provides a complete sharpening solution in a small compact unit. The base of the unit acts as a reservoir and permits the continuous submersion of the unused stones keeping stones clean and saturated, ready for immediate use and years of utility. Simply rotating the handle brings the desired stone into position for sharpening. All of the stones are replaceable and a range of stones are available beyond those supplied with the original purchase permitting the end user to not only replace worn or damaged stones but to also substitute different specifications to tailor the unit to best suit the requirementNorton Knife Sharpener Stone Oil for Tool and Knife Sharpening Stone , 4.5 OZNorton 4-1/2-ounce sharpening stone oil is formulated for oilstone lubrication, with the correct viscosity for smooth sharpening without loading or clogging stones; it flushes away dislodged abrasive and metal chips to prevent metal from bonding with the surface of an oilstone, and meets U.S. Pharmacopeia standards for mineral oil purity. Norton sharpening stone oil is a highly refined lubricant that is effective for many other lubricating uses. This 4-1/2-oz. can of sharpening stone oil, measuring 5 x 2 x 1 inch (H x W x D), has a snug-fitting lid, stores compactly, and fits into Norton portable sharpening systems for mobile use. (H is height, the vertical distance from lowest to highest point; W is width, the horizontal distance from left to right; D is depth, the horizontal distance from front to back.) This oil meets U.S. Pharmacopeia (USP) standards for mineral oil purity. Sharpening stones, or whetstones, are abrasive surfaces used to sharpen and hone the edges of steel cutting implements, such as chisels, knives, scissors, hand scrapers, and plane blades. Sharpening is the process of creating or re-establishing a cutting edge by grinding away portions of the metal to adjust the angle of the edge and reform the shape. Honing removes small imperfections. Stones can be flat, for working flat edges, or shaped, for edges that are more complex. When used with lubricating liquid, a sharpening stone can be called a waterstone or an oilstone, based on the lubricant required. Oilstones use sharpening stone oil for lubrication when sharpening, to prevent metal from bonding with the abrasive surface by flushing away dislodged abrasive and metal chips. Norton Abrasives manufactures sanding, grinding, and polishing abrasives, and has been located in the United States since 1885. Norton, now a brand of Saint-Gobain, meets ISO 9000 and 14001 certification for quality and environmental management standards. To make your sharpening job easier, try Norton Sharpening Stone Oil. Specially formulated for all types of metal. Norton sharpening stone oil is a natural, highly refined light mineral oil. It is a pharmacopia grade oil so it is safe for use on kitchen tools. Mineral oil lubrication is recommended for all Norton oil stones. Oil acts as an effective lubricant during the sharpening process to float away metal and abrasive dust that would otherwise clog up the stone and ultimately render it useless.
