About use Simply set the pressure for your air gun or inflatable object and let the PCP air compressor do the rest. When the target pressure is reached during inflation, the pump will shut down, allowing you to keep your hands free, save time, and do other things during inflation. In addition, the hose is equipped with 8mm female fittings at both ends for direct installation to the male nozzles of most PCP airsoft guns and colored bullet barrels.
Auto-Stop&Smart Security Protection When the air pressure reaches the preset value; continuously inflate for about 25 minutes; the temperatures get 85℃(185F); the VE3 compressor will automatically stop filling and keep the fans running to dissipate heat. The alarm sound and prompt code(E4) can be cancelled by clicking the "compressor" button once. The portability, safety and durability has always been our designers' top priority.
8MM quick connector and compact high performance The 8MM internal thread FOSTER connector can be quickly connected and disconnected. It is directly applicable to most nozzles of PCP air rifles/pistols, paintball tanks, and mini diving bottles. The cylinder, cooling system, and motor have all been significantly upgraded, achieving a balance between high performance, cost-effectiveness, safety, and durability
10% increase in productivity from 0.5Psi to 4500 psi filling a 3000L tank, it only takes 4-5 minutes. Fill 0.5L from 0-4500psi and it only takes 14-16 minutes.
Please read the user instruction manual carefully before applying the compressor Connecting the Aviation (Hose Assembly) to the A2 Portable The compressor is at one end and the PCP is at the other. Tighten the pressure relief valve. Turn on the barometer clockwise so that it reaches the desired air pressure. Maximum 4500psi/30MPa. While the cooling fan is running, press the "Compressor" button to start inflating. When fully inflated, turn off the compressor function, close the air leak screw at the front of the main unit by turning it, and disconnect the hose after exhausting.
