MOCA Timing Chain Kit with Water Pump & Oil Pump - Compatible with 06-10 Ford Explorer 4.6L, 07-10 Ford Explorer Sport Trac 4.6L, 06-10 Mercury Mountaineer 4.6L V8 (281Cu. In. VIN 8) - Engine Repair & Maintenance Replacement Parts for Smooth Performance

Package Includes: 2 Timing Chains (116 Links)1 Tensioner (Left Upper)1 Tensioner (Right Upper)1 Guide (Tensioner Rail-Left)1 Guide (Tensioner Rail-Right)1 Guide (Fixed Rail-Left)1 Guide (Fixed Rail-Right)1 Oil Pump1 Water Pump Car Application: 2006-2010 for Ford Explorer 4.6L 281Cu. In. V8 GAS SOHC Naturally Aspirated VIN Code “8”2007-2010 for Ford Explorer Sport Trac 4.6L 281Cu. In. V8 GAS SOHC Naturally Aspirated VIN Code “8”2006-2010 for Mercury Mountaineer 4.6L 281Cu. In. V8 GAS SOHC Naturally Aspirated VIN Code “8” How to confirm whether this kit fits for your vehicle Use the vehicle model matching tool to check if it is fit for your car. Check product picture or product description, compare timing chain links and sprocket teeth with your old parts. If you really can’t confirm, we will check for you accurately by your complete VIN Code. What does a timing chain do? A timing chain synchronizes the rotation of the crankshaft and camshaft(s) ensuring proper timing and allows the engine's valves to open and close during each cylinder's firing. The chain is located inside of the engine and needs to be lubricated by the oil in the engine, making oil maintenance important as well. Every time you use the engine, the timing chain is in use When does a timing chain need to be replaced? The timing chain normally needs to be replaced between 80,000 and 120,000 miles unless there is a specific problem. Issues with the chain are common in higher mileage vehicles. If driving an older vehicle, or one with close to 100,000 miles, it is recommended to look for symptoms of the timing chain going bad or failing. Signs a timing chain needs to be replaced include: Later model VVT applications will generate engine codes and check engine lights prior to engine rattleOlder, pre-VVT applications will generate engine rattle Should I also replace sprockets and tensioners? Yes, MOCA recommends that all components of the timing system be replaced at the same time. Using a worn sprocket may result in the chain not meshing with the worn sprocket, which could result in poor engine performance. Are these chains coming with timing marks? Each chain has a Timing Chain mark for easier installation. When changing the timing chain or adjusting timing on a vehicle, understanding the timing marks on the crankshaft and camshaft pulleys is key to getting it right How to change a timing chain The timing chain is defective or broken. The vehicle is lifted and supported on jack stands. The coolant and oil is drained Removing the Drive Belt Components. The water pump, belt and accessories are removed to gain access for the timing chain. Oil pan is lowered The timing cover is removed. Lube the gear before installing the new chain. Place the new chain onto the gears while aligning with the marks. Tighten the chain according to your car manual's specifications The timing cover and oil pan is reinstalled. The water pump, belt and accessories are re-installed as required. The engine oil and coolant are filled. The vehicle is removed from the jack stands

Fits please confirm this item fits for your vehicle (Check Fitment Data Above or see description below).

All the Components are produced under strictly observed and meet or exceed OEM performance requirements in Manufacturing and Material.

Part Numbers 9-0387SGX, 125-5990, AW4127, F5A2-6600B.

Utilizes the latest in design and material technology, ensuring quiet and maintenance-free experience, link-belt type timing chain for exceptional durability.

Local US friendly professional team to resolve your issues in time, solving any MOCA product related issues for you.