Dry Ice Blasting Machine HTS705 - Professional Dry Ice Blaster Cleaner with Adjustable Pressure & 4 Nozzles - Removes Oil, Rust, Carbon Deposits - 110V/220V - Perfect for Engine Cleaning, Industrial Equipment Maintenance & Surface Restoration

HTS705 Dry Ice Cleaning Blaster Machine is a cleaning machine applied in the field of automotive servicing, in which the dry ice particles are accelerated by the airflow at high speed to remove the carbon buildup. It can be used for the cleaning of carbon deposits in the engine compartment, cylinder combustion chamber, intake valve, throttle valve, and etc. HTS705 Dry Ice Cleaning Blaster Machine uses compressed air as power to spray dry ice particles to the surface of the cleaned object at supersonic speed. However, it does not rely solely on the kinetic energy of dry ice particles, but uses the ultra-low temperature performance of dry ice to achieve the purpose of decontamination. Dry ice spraying medium - dry ice particles accelerate in the high-pressure air flow and impact the surface to be cleaned. The unique feature of dry ice cleaning is that the dry ice particles are vaporized at the moment during cleaning, and the momentum of dry ice disappears at the moment of impact. The heat exchange between dry ice particles and the cleaning surface occurs rapidly, resulting in the rapid sublimation of solid CO2 into gas, and the volume expansion of dry ice particles is nearly 800 times within a few thousandths of a second, thus causing “micro explosion” at the impact point. Due to the volatilization of CO2, no secondary waste is generated during the dry ice cleaning process, and only the dirt that needs to be cleaned. WIDELY USED HTS705 Dry ice blasters are suitable for removing stuck and flaking formulations, silicone and rubber residues, oils, greases, turpentine, asphalt, dirt, inks, resins, adhesives, waxes and paints, chewing gum, and graffiti. It has been widely used in rubber, casting, automobile, marine, electric power, chemical, printing, plastic, food, pharmaceutical and aviation fields. HIGH-EFFICIENCY CLEANING HTS705 Dry Ice Cleaning Blaster Machine can fully clean the carbon deposits in all parts of the car withoutdisassembling the cleaning parts. This effectively reduces thecleaning time and greatly improves efficiency. TECHNICAL PARAMETER Power supply: AC110V/220V±10% 50HzDry ice capacity: 7.5KGCompressed air flow: 1~3.0m³/minState of dry ice particles: 3mmAir supply pressure: 0.3~1.0MpaDry ice blasting amount (adjustable): 0~3.2Kg/minLength of Air Tube: 3mLength of Ground Wire: 3mSize: 403×500×580mmNet weight: 49KG/Gross weight: 80KG Control Panel Intelligent microcomputer can precisely control the pressure, which can freely adjust the pressure and ice rate.Quickly remove all kinds of intractable dirt.The use of dry ice blaster can thoroughly remove the attached dirt and protect the equipment to avoid affecting the operation and use of the equipment during cleaning. Friendly & Safety Dry ice is a non-toxic substance that will sublimate and gasify without any secondary waste residue; no reagents, no chemical components,and no secondary pollution concerns;it is friendly that will keep equipment safe and avoid harm to personnel. Cleaning Time & Ice Consumption Factors:Cleaning degreeCarbon deposits AMTTechnician's skillAvoid personal injury caused by hazardous substances.Cleaning with dry ice instead of toxic chemical to avoid long-term adhesion of undesirable substances to the equipment, affecting the overall operation and causing injury to personnel. IMPORTANT HINT 1. Before using the dry ice blasting machine, please read this manual carefully for proper operation. (Manuals can be downloaded in Product Guides and Documentation on the details page.)2. It is strictly forbidden to touch the dry ice and ice blasting pipe.3. It must be kept clean when adding dry ice, and no other foreign objects fall into the equipment.4. This equipment uses solid CO2 particles, and ventilation must be ensured when operating dry ice cleaning.5. Before carrying out the work, it is necessary to wear protective goggles, ear muffs, work clothes and gloves.6. Before each work, set the ice supply speed to "0" and test if condensate is sprayed out of the nozzle.7. Whenever the operation is not finished and you need to pause in the middle, please first set the ice speed to "0" and then turn on the blasting gun for 30-50s to ensure that the leftover ice is blasted out of the ice outlet tube to prevent ice blockage.8. In order to ensure sufficient pressure and flow of compressed air from the air source, please choose the supply pipe of the air source larger than DN20 outside diameter and the pressure of the air source larger than 6 bar, so as to have a better cleaning effect.9. In the middle of ongoing work, if you encounter equipment failure, please immediately disconnect the power. Packing List 1pcs * HTS705 Dry Ice Cleaning Blaster Machine1pcs * Intake hose (Connect to external air source)1pcs * Ice outlet pipe (With signal line and switch)1pcs * Rotatable ice spray handle4pcs * Ice spray barrel1pcs * Earplugs1pcs * Safety goggles1pairs * Gloves1pcs * Ice shovel2pcs * Fuses2pcs * Ground clip wire1pcs* User manual1pcs * Ground wire connector Operation Steps Step 1: Connect the air source andpower supply:Step 2: Connect the ice blasting gun;Step 3: Connect the ground wire;Step 4: Add in dry ice;Step 5: Turn on the power and adjustthe amount of dry ice;Step 6: Start cleaning; Equipment debuggingConnect the host to the external air source and external power supply. Check whether the data of the air pressure indicator is normal and whether the power connection is normal (make sure the power supply is grounded normally).Make preparations for testing machine, including connecting the machine and accessories properly, checking whether the parts are loose, and cleaning the unnecessary items placed on the machine body or the work area.Turn on the power switch, then turn it to start mode first. And then press the start switch on the handle to run, adjust the dry ice volume from 0 to its maximum, check whether there is any abnormality, and then put dry ice materials into the machine for trial operation. Adjusting the volume of dry ice blasting:1. Add an appropriate volume of dry ice and cover the lid. According to the required cleaning degree, turn the dry ice volume adjusting controller to achieve the best effect as needed (it is recommended to set it to “5” first and adjust it according to the cleaning effect).2. If the barrel with smaller inner diameter is adopted, it is recommended to set it to “3” and then increase it as appropriate.3. After confirmation, align the spray gun with the parts to be cleaned, and press the start switch on the handle to enter the cleaning procedure. After the Cleaning Work:1. Turn the dry ice volume adjusting controller to “0” and start the spray gun to spray for 30-50s until no water is sprayed.2. The dry ice residue can be removed by extending the product’s spraying time, and manual cleaning is required if necessary.3. Turn off the power switch, disconnect the air source, and store the spray gun and accessories. How much dry ice is needed to clean a car engine?The amount of dry ice depends on the need for cleaning. For general engine cleaning, 3KG dry ice can be used. What are the requirements for the compressor?The air pressure requires 6 Bar or more and the gas storage tank requires 300L；Air compressor power 7.5kw.

♻️【Widely Used】 Dry Ice Blasting machine is ideally suited for wide applications in automobiles, electric power, rubber, plastic, chemical, printing, food, pharmaceutical, casting, ship, and aviation.

♻️【Environmentally Friendly & Safe & No Residue】Automotive Dry Ice Blasters Cleaning is a non-toxic substance without any reagents and chemicals. Use dry ice cleaning to replace toxic chemical cleaning, dry ice particles have no residual volatilization, no secondary waste residues and secondary pollution problems, and avoid long-term adhesion of undesirable substances to the equipment to affect the overall operation and cause damage to operators.

♻️【High-Efficiency Cleaning】 HTS705 Dry Ice Blasting Machine adopts dry ice cleaning tech, which accelerates the dry ice particles through high-pressure airflow and impacts the deposits, thus removing the carbon buildup thoroughly. It can fully clean the carbon deposits in all vehicle parts without disassembling them as well. This effectively reduces the cleaning time and greatly improves efficiency.

♻️【User-Friendly Design】The universal wheel at the bottom of the dry ice blasting equipment supports 360° rotation for cleaning; multi-function control panel; large knob control, precise positioning of dry ice spray volume; body pendant for easy placement; stainless steel funnel, waterproof, rust and corrosion resistant, ergonomic Designed to view the amount of dry ice in real-time.

♻️【Intelligent Control & 3m High-Pressure Tube】HTS705 Dry Ice Blasters Machine adopts intelligent digital control, which can better adjust the ice output and effectively remove carbon on the surface area; it is equipped with a 3m high-pressure rubber hose, which is wear-resistant, anti-corrosion and anti-aging. The dry ice tank is made of high-quality stainless steel, which is rust and corrosion resistant. Large capacity 5KG.

♻️【Non-Destructive Cleaning & Improve Efficiency】The dry ice cleaning machine can completely remove the attached dirt, and can also reduce the disassembly and damage to the equipment, avoid affecting the operation and use of the equipment during cleaning, and fundamentally protect the equipment and improve productivity. The dry ice blasting machine can clean different equipment and can be used in conditions where water washing and sandblasting are prohibited.

♻️【Three Years Warranty, Lifetime Maintenance】 For damage caused by non-human factors, we promises to resend parts for free within 3 years. For any needs, you are warmly welcomed to contact us and we will get back to you ASAP within 24 hours.